The general delivery standard in the office market is to deliver in the form of clean water houses. After years of development, more and more single property office buildings are now pre laid with raised floors when delivering to customers, such as IFS, Renheng Land Plaza, China Resources Building, Intime Center and other high-end Grade A office buildings. So, what are the benefits of pre laying elevated flooring? What are the unique advantages of anti-static elevated flooring?
1. Strong flexibility
Compared with suspended ceiling systems, the integrated floor air supply system eliminates most of the air ducts, reduces the installation process, and can be installed quickly and conveniently. If there are changes in the working position and cooling load of the personnel, simply moving the cover plate of the elevated floor can easily increase, decrease, or rearrange the air supply end device.
2. The convenience of comprehensive cabling
In today's constantly evolving field of communication and networking, it is necessary to change the cable and wire routing system from time to time to meet the adjustment of employee workstations. The embedded pipelines of building structures with less comprehensive cabling are easily achievable for elevated floors.
3. Improved thermal comfort and indoor air quality
The working space of general office personnel is between 1m and 2.2m above the floor, and the floor air supply system directly delivers air conditioning to the working area through the air supply terminal device. Users can control both the air volume and the outlet temperature of the FTU, which significantly improves personal comfort. In addition, using floor air supply can make the concrete floor slab a cold (hot) storage layer, which can reduce temperature fluctuations and peak cooling loads. It can also allow users to turn off the main unit about 0.5 hours before leaving work and use the cold (hot) storage capacity to provide cooling (heating), meeting the comfort requirements of indoor personnel.
4. Energy saving
The energy-saving effect of using the elevated layer of the raised floor for air conditioning supply can be reflected in the following aspects:
1) Due to the airflow flowing from the floor to the ceiling. So most of the heat generated by the lighting fixtures installed on the ceiling is discharged before reaching the ground, which increases the exhaust temperature. Reduced total cooling load:
2) Due to the large cross-sectional area of the underfloor air supply. So the head loss is relatively small, reducing the power of the wind turbine.
5. Easy to clean
When it is necessary to clean the interior of the raised floor or the air supply end device. Just move the device out, easy to operate. The impact range is also small.
6. Save building height
Because floor static pressure boxes are usually thinner than suspended ceiling static pressure boxes. And other service facilities can be installed inside the static pressure box, so using a floor air supply system can reduce the height of indoor hanging items and lower the floor height.
The height of the elevated floor is generally 10-15CM, and the height of the elevated floor in Super A office buildings is usually 15CM. For example, the height of the elevated floor in International Finance (IFS) is 15CM. Due to the high floor height of IFS itself, in addition to the height of the elevated floor and ceiling, the net height of IFS is 3 meters. Working at such a height, employees will not feel depressed and will be more comfortable.